Import a Test Mode

FieldLab users can share Test Modes with other team members. The person who created a Test Mode can export it and send it as an email attachment or put it in a shared location for other team members to access and Import into their FieldLab Desktop Test Mode Library. This article shows you how.

Instructions for exporting a Test Mode are here: Share Test Modes

Before you can import a Test Mode, your computer will need to have access to a Test Mode file that has been exported from FieldLab Desktop.

1

Select Test Modes > Import Test Modes

2

Select the Test Mode file you wish to import from your hard drive or local network. Open it.

3

If the file has imported successfully, you will get a confirmation message.

4

The newly imported Test Mode should now be visible in your Test Mode Library

• Related Articles

• Edit an existing Test

  Any existing Test can be revised with FieldLab Desktop. 1 Select the Test Modes Button. 2 Select the Test Mode you wish to edit from the list in the left column. 3 Select the Edit Button. 4 Make the necessary revisions to the Test Mode. 5 Save your ...

• PSV/PRV Test Setup: Quick Overview

  Overview of the PSV/PRV Test Modes settings screen in FieldLab Desktop. This features requires FieldLab Desktop 1.24.0 or later. Download the latest version for free. Test Mode Name: Name your test mode. The name you select will help you identify ...

• Create a custom Pressure Safety Valve / Pressure Relief Valve Test for a FieldLab

  Learn how to create a new PSV/PRV Test in FieldLab Desktop. Add your test to a FieldLab Pressure Calibrator to perform tests on pressure safety and pressure relief valves. This features requires FieldLab Desktop version 1.24.0 or later. Download the ...

• Add Custom Data Fields to a Test

  Note: You may need to perform free updates to your FieldLab and FieldLab Desktop in order to use this feature. Available for FieldLab Desktop versions 1.10.0 and newer, and FieldLab Pressure Calibrator firmware v1.117 and newer.   Instructions for ...

• Share Test Modes

  Once you create a new Test Mode, or customize an existing one, you can share it with other people to use by exporting it. Once exported, other users can import it into their Test Mode Library. Instructions for importing are here: Import a Test Mode. ...

• Recent Articles

• Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

  This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...

• Operation Instructions 10,000 psi Hand Pump (Model XTHP)

  Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...

• Operation Instructions 5000 psi Hand Pump (Model QTHP)

  Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...

• Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

  What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...

• A Gauge is Overpressurized

  Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...