Install FieldLab Desktop on your computer

Install FieldLab Desktop on your computer


Computer Requirements: 
Any PC running Windows 10 or greater.
  1. Download FieldLab Desktop. Go to www.ralstonfieldlab.com/desktop and download the latest version. If you don't already have an account, you can create one.
  2. ​Once downloaded, open the installer and follow the instructions on your screen.



    • Related Articles

    • Log pressure and/or temperature data to your computer with FieldLab Desktop

      This article applies to the following products: Field Gauge LC10, all models Field Gauge LC20, all models Process Meter LC30, all models FieldLab Digital Pressure Calibrator, all models. Things you will need: A PC running Windows.  FieldLab Desktop ...
    • Link a Ralston device to FieldLab Desktop

      Manage settings and update firmware on a Field Gauge, FieldLab, or Process Meter by linking it to FieldLab Desktop software on your computer. 1. Download and install the latest version of FieldLab Desktop. You will need FieldLab Desktop version 1.24 ...
    • Install USB Driver

      If you're having trouble getting your FieldLab connected to the PC with the provided USB cord, you may need to reinstall the Windows driver for the device. Installing drivers requires you to be a Windows administrator. 1 Open FieldLab Desktop on your ...
    • Update FieldLab Desktop to the Latest Version

      What happens if I don't update FieldLab Desktop to version 1.38.0? As of Friday May 5, 2023: Without this update proper functionality of the application and your devices cannot be maintained. Without the 1.38.0 update to FieldLab Desktop will be ...
    • Change Display Sleep Timer on a FieldLab for a Data Logging Test

      When you Activate a Test Mode on a FieldLab Digital Pressure Calibrator, the settings for that Test Mode will apply to the FieldLab as long as that Test Mode is active. Each Test Mode has its own Auto Display Sleep settings. You can use FieldLab ...
    • Recent Articles

    • Turn Bluetooth radio on or off on a Field Gauge LC20 or Process Meter LC30

      This article applies to all Field Gauge LC20 and Process Meter LC30 models equipped with a Bluetooth radio. To determine if your gauge is Bluetooth enabled: Check the last two characters in the model number printed on the gauge. If they are "B1", the ...
    • Operation Instructions 10,000 psi Hand Pump (Model XTHP)

      Add Fluid 1. Remove the vent plug 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Add around 2 inches of fluid, or enough fluid to keep the bottom of the fluid ...
    • Operation Instructions 5000 psi Hand Pump (Model QTHP)

      Add Fluid 1. Remove the Vent Plug at the top of the Fluid Chamber 2. Add fluid to the Fluid Chamber Acceptable fluids: Ralston Calibration Oil, mineral oil, transmission fluid, water, or alcohol. Remove the vent plug and add around 2 inches of fluid, ...
    • Connect one or more Ralston gauges to FieldLab Desktop App with Bluetooth

      What you will need: One or more Bluetooth-enabled Ralston Gauge. How to tell if your Field Gauge has Bluetooth. The FieldLab Desktop app installed on your Windows computer. Version 1.40.4 or later. Update FieldLab Desktop to the Latest Version. 1. ...
    • A Gauge is Overpressurized

      Before applying pressure to your Ralston gauge, confirm that the gauge is rated for higher than the max pressure that will be applied. Gauges that have been overpressured above 33% of max rating will be unable to display or log accurate pressure ...